# JYOTICNC (JYOTICNC) — Stock analysis

> Faxioms all-in-one stock review. Canonical page: https://faxioms.com/stocks/jyoticnc

## Current market snapshot

- Exchange: NSE
- Country: India
- Price: ₹1,047.85
- Change: +6.83%
- As of: 2026-09-18
- 1D return: +7.02%
- 5D return: +4.56%
- 1M return: +10.52%
- Latest complete quarter: fy27_q1

## Faxioms Analysis

_As of 2026-09-18_

### Technical Outlook

As of September 18, 2026, JYOTICNC is trading at ₹1049.7, showing a bullish technical stance on the daily and weekly charts, while the monthly timeframe indicates a bearish trend. The daily chart displays a strong uptrend, with the price trading above key moving averages including the 20-day EMA (₹980.41), 50-day SMA (₹896.02), and the 200-day SMA (₹826.55). The weekly chart also shows bullish alignment, with the price above its 20-week EMA (₹868.12) and 50-week SMA (₹841.61), supported by a bullish Supertrend. However, the monthly timeframe presents a conflicting signal, with the price below the monthly Supertrend (₹1317.62), suggesting potential overhead pressure or a longer-term divergence.

Recent price action on September 18, 2026, saw an extreme upward anomaly in volume with price movement, with a volume ratio of 3.96 and a Z-score of 4.7, indicating significant market interest. Weekly patterns include an active "Morning Star" and an active "Outside Bar" formation. The stock is positioned near its recent highs, with the nearest resistance noted at ₹1051.13, approximately 0.14% above the current price, and support identified at ₹1029.12, about 1.96% below. The stock's annualized volatility stands at 48%, with a current drawdown of -24%.

Key conditions to monitor include the price's ability to sustain above the ₹1029.12 support level. A break above the immediate resistance at ₹1051.13 could signal further upward momentum. Conversely, a sustained move below the daily support levels, particularly the ₹1000.10 mark, could indicate a weakening of the short-term bullish trend, especially given the bearish signal on the monthly chart.

- On September 18, 2026, JYOTICNC traded at ₹1049.7.
- Daily and weekly timeframes show bullish trends, while the monthly timeframe is bearish.
- Nearest resistance is observed at ₹1051.13 (14% above current price).
- Nearest support is identified at ₹1029.12 (1.96% below current price).
- An extreme upward volume anomaly occurred on September 18, 2026.

- Morning Star
- Outside Bar
- Doji
- Harami

### News Context

Jyoti CNC Automation Limited has announced its 35th Annual General Meeting (AGM) scheduled for September 30, 2026. The meeting will address the adoption of audited financial statements for the fiscal year ending March 31, 2026, the reappointment of Mr. Parakramsinh G. Jadeja as a director, and the ratification of the cost auditor's remuneration for the upcoming fiscal year ending March 31, 2027. Remote e-voting will be available from September 27 to September 29, 2026, with a cutoff date of September 23, 2026, for eligible voters. The company also released its 35th Annual Report for the financial year ended March 31, 2026, detailing standalone revenue of ₹1,818 crore and consolidated revenue of ₹2,093 crore. Capital expenditure was directed towards capacity expansion in Rajkot and operations in France. Standalone operating profit before changes in liabilities and assets was ₹579.50 crore, with cash generated from operations at ₹102.74 crore. The company's gearing ratio increased to 39.71% as of March 31, 2026, from 36.38% in the previous year, with no reported breaches in financial covenants.

- Jyoti CNC Automation Limited will hold its 35th AGM on September 30, 2026, to approve financial statements and reappoint a director.
- The company reported standalone revenue of ₹1,818 crore and consolidated revenue of ₹2,093 crore for the fiscal year ended March 31, 2026.
- Standalone operating profit before changes in liabilities and assets was ₹579.50 crore for FY26.
- Cash generated from operations was ₹102.74 crore for the fiscal year ended March 31, 2026.
- The gearing ratio stood at 39.71% as of March 31, 2026, an increase from 36.38% in the prior year.

- NAME OF PROMOTER(S) OR PACS WITH HIM : Anilkumar Bhikhabhai Virani
- Jyoti CNC Automation Limited has informed the Exchange about Copy of Newspaper Publication |SUBJECT: Copy of Newspaper Publication
- Jyoti CNC Automation Limited has informed the Exchange regarding Notice of Annual General Meeting to be held on September 30, 2026 |SUBJECT: Shareholders meeting
- JYOTI CNC AUTOMATION LIMITED has informed the Exchange about Notice of Shareholders Meeting for Annual General Meeting to be held on 30-Sep-2026 |SUBJECT: Notice Of Shareholders Meetings-XBRL
- AS ON DATE : 08-SEP-26

### What Changed

As of September 18, 2026, Jyoti CNC Automation's stock has seen an increase in its trading price. The previous closing price on an unspecified prior date was ₹980.85, and the current price on September 18, 2026, is ₹1049.7. There are no new filings or news developments reported in the provided evidence for this period. The company's common name remains Jyoti CNC Automation, and it is listed on the NSE.

- On 2026-09-18, the trading price for Jyoti CNC Automation was ₹1049.7.
- The previous closing price was ₹980.85.
- The company is listed on the NSE.
- No new filings or news were reported as of 2026-09-18.

### Official Filings

Jyoti CNC Automation Limited has provided its 35th Annual Report for the financial year ending March 31, 2026. The report indicates standalone revenue of ₹1,818 crore and consolidated revenue of ₹2,093 crore. The company's capital expenditure was directed towards expanding its Rajkot facility and advancing operations in Huron, France. Standalone operating profit before changes in liabilities and assets was ₹579.50 crore, with cash generated from operations amounting to ₹102.74 crore. The gearing ratio increased to 39.71% as of March 31, 2026, from 36.38% in the previous year, with no reported breaches in financial covenants. The company has also announced its 35th Annual General Meeting (AGM) scheduled for September 30, 2026. Key agenda items include the adoption of audited standalone and consolidated financial statements for the fiscal year ended March 31, 2026, the reappointment of Mr. Parakramsinh G. Jadeja as a director, and the ratification of the cost auditor's remuneration for the financial year ending March 31, 2027. Remote e-voting for the AGM will be open from September 27 to September 29, 2026, with a cutoff date of September 23, 2026, to determine eligible voters. Additionally, the company has scheduled virtual investor and analyst meetings on September 8, 2026, and held an in-person meeting on August 25, 2026, to discuss publicly available information.

- Annual Report for FY ended March 31, 2026, filed on September 7, 2026, shows standalone revenue of ₹1,818 crore and consolidated revenue of ₹2,093 crore.
- Standalone operating profit before changes in liabilities and assets was ₹579.50 crore for FY ended March 31, 2026.
- Cash generated from operations was ₹102.74 crore for FY ended March 31, 2026.
- Gearing ratio stood at 39.71% as of March 31, 2026, an increase from 36.38% in the prior year.
- 35th Annual General Meeting scheduled for September 30, 2026, to adopt financial statements for FY ended March 31, 2026, and reappoint director Mr. Parakramsinh G. Jadeja.
- Remote e-voting for the AGM will take place from September 27 to September 29, 2026.

- NAME OF PROMOTER(S) OR PACS WITH HIM : Anilkumar Bhikhabhai Virani
- Jyoti CNC Automation Limited has informed the Exchange about Copy of Newspaper Publication |SUBJECT: Copy of Newspaper Publication
- Jyoti CNC Automation Limited has informed the Exchange regarding Notice of Annual General Meeting to be held on September 30, 2026 |SUBJECT: Shareholders meeting
- JYOTI CNC AUTOMATION LIMITED has informed the Exchange about Notice of Shareholders Meeting for Annual General Meeting to be held on 30-Sep-2026 |SUBJECT: Notice Of Shareholders Meetings-XBRL
- AS ON DATE : 08-SEP-26
- Jyoti CNC Automation Limited has informed the Exchange about Schedule of Analysts or Institutional Investors Meet |SUBJECT: Analyst/Investor Meet Para A-XBRL
- Jyoti CNC Automation Limited has informed the Exchange about Schedule of meet |SUBJECT: Analysts/Institutional Investor Meet/Con. Call Updates
- NAME OF PROMOTER(S) OR PACS WITH HIM : Anilkumar Bhikhabhai Virani
- Jyoti CNC Automation Limited has informed the Exchange about Schedule of meet |SUBJECT: Analysts/Institutional Investor Meet/Con. Call Updates
- Jyoti CNC Automation Limited has informed the Exchange about Schedule of Analysts or Institutional Investors Meet |SUBJECT: Analyst/Investor Meet Para A-XBRL

### Fundamentals

Jyoti CNC Automation reported revenue from operations of ₹508.47 crore in Q1 FY2026-27. This follows revenues of ₹575.90 crore in Q3 FY2025-26 and ₹599.16 crore in Q4 FY2025-26. Profit After Tax (PAT) for Q1 FY2026-27 was ₹57.14 crore, a decrease from ₹90.57 crore in Q4 FY2025-26 and ₹88.51 crore in Q3 FY2025-26. The company's Profit Before Tax (PBT) also saw a decline in Q1 FY2026-27, reaching ₹73.41 crore compared to ₹138.11 crore in Q4 FY2025-26 and ₹123.75 crore in Q3 FY2025-26. Finance costs increased to ₹24.34 crore in Q1 FY2026-27 from ₹19.83 crore in Q4 FY2025-26, while Other Expenses rose to ₹93.73 crore from ₹81.17 crore in the preceding quarter. Tax expense for Q1 FY2026-27 was ₹16.27 crore, down from ₹47.54 crore in Q4 FY2025-26.

Key monitoring areas include the sequential decline in revenue and profitability from Q4 FY2025-26 to Q1 FY2026-27. Investors may wish to observe the trend in finance costs and other expenses relative to revenue in upcoming periods to assess operating leverage and cost management.

- Revenue from operations for Q1 FY2026-27 was ₹508.47 crore.
- Profit After Tax for Q1 FY2026-27 was ₹57.14 crore, a decrease from ₹90.57 crore in Q4 FY2025-26.
- Profit Before Tax declined to ₹73.41 crore in Q1 FY2026-27 from ₹138.11 crore in Q4 FY2025-26.
- Finance costs increased to ₹24.34 crore in Q1 FY2026-27, up from ₹19.83 crore in Q4 FY2025-26.
- Other Expenses increased to ₹93.73 crore in Q1 FY2026-27, up from ₹81.17 crore in Q4 FY2025-26.

### Bull Case

Jyoti CNC Automation's technical indicators suggest a constructive outlook based on daily and weekly trends as of September 18, 2026. The daily trend shows a bullish Supertrend signal at ₹922.24, with the closing price of ₹1049.7 trading above both the 20-day Exponential Moving Average (EMA) of ₹980.41 and the 50-day EMA of ₹912.81. The slopes of the 20-day and 50-day Simple Moving Averages (SMA) also indicate upward momentum. On a weekly basis, the Supertrend is also bullish, standing at ₹773.98, with the closing price well above the 20-day EMA (₹868.12) and 50-day EMA (₹871.63). The positive momentum is further supported by a 3-month return of 50% and a 6-month return of 37%.

- As of September 18, 2026, the daily Supertrend indicator for Jyoti CNC Automation is bullish at ₹922.24.
- The closing price of ₹1049.7 on September 18, 2026, is above the 20-day EMA (₹980.41) and 50-day EMA (₹912.81) on a daily basis.
- The weekly Supertrend indicator is also bullish at ₹773.98 as of September 18, 2026.
- The company has demonstrated a 3-month return of 50% and a 6-month return of 37%.

### Bear Case

The company's monthly trend analysis indicates a bearish Supertrend reading at 1317.62, suggesting potential downward pressure over a longer timeframe, despite a bullish daily Supertrend. The stock has experienced a significant drawdown of -0.58 from its peak and currently sits at a -0.24 drawdown. Annualized volatility stands at 0.48, and the Average True Range (ATR) as a percentage of the price is 4.14%, indicating a degree of price fluctuation.

- Monthly trend shows a bearish Supertrend signal at 1317.62 as of 2026-09-18.
- The stock has a maximum drawdown of -0.58 and a current drawdown of -0.24.
- Annualized volatility is 0.48, with an ATR of 4.14%.

### FAQs

**What were Jyoti CNC Automation's financial results for the fiscal year ended March 31, 2026, and how did its capital expenditure progress?**

For the fiscal year ended March 31, 2026, Jyoti CNC Automation reported standalone revenue of ₹1,818 crore and consolidated revenue of ₹2,093 crore. The company's operating profit before changes in liabilities and assets was ₹579.50 crore on a standalone basis, with cash generated from operations amounting to ₹102.74 crore. Capital expenditure during this period was directed towards expanding capacity in Rajkot and advancing operations in Huron, France. The company's gearing ratio increased to 39.71% as of March 31, 2026, from 36.38% in the previous year, with no reported breaches in financial covenants.

**What key matters will be addressed at Jyoti CNC Automation's upcoming Annual General Meeting (AGM) on September 30, 2026?**

Jyoti CNC Automation Limited's 35th Annual General Meeting is scheduled for September 30, 2026, in Rajkot. The agenda includes the adoption of audited standalone and consolidated financial statements for the fiscal year ended March 31, 2026. Shareholders will also vote on the reappointment of Mr. Parakramsinh G. Jadeja as a director and ratify the remuneration of the cost auditor for the financial year ending March 31, 2027, which is set at ₹70,000 plus GST. Remote e-voting will be available from September 27 to September 29, 2026, with a cutoff date of September 23, 2026, for eligible voters.

**What is the current technical trend and recent price performance of Jyoti CNC Automation shares?**

As of September 18, 2026, Jyoti CNC Automation's daily technical trend is indicated as bullish, with the Supertrend indicator at 922.24 and the closing price at ₹1049.7. The stock has shown positive returns over various periods, including a 7% return in the last day, 13% in the last month, and 37% in the last six months. However, the monthly trend is indicated as bearish, with the Supertrend at 1317.62. The stock's annualized volatility is 0.48, and its current drawdown is -0.24, with a maximum drawdown of -0.58.

- NAME OF PROMOTER(S) OR PACS WITH HIM : Anilkumar Bhikhabhai Virani
- Jyoti CNC Automation Limited has informed the Exchange about Copy of Newspaper Publication |SUBJECT: Copy of Newspaper Publication
- Jyoti CNC Automation Limited has informed the Exchange regarding Notice of Annual General Meeting to be held on September 30, 2026 |SUBJECT: Shareholders meeting
- JYOTI CNC AUTOMATION LIMITED has informed the Exchange about Notice of Shareholders Meeting for Annual General Meeting to be held on 30-Sep-2026 |SUBJECT: Notice Of Shareholders Meetings-XBRL
- AS ON DATE : 08-SEP-26
## Technical analytics

- As of: 2026-09-18
- Daily trend: Strong Uptrend
- Weekly trend: Weak Uptrend
- Pivot point: ₹982.97
- Risk regime: Price Risk Requires Attention

### Support levels
- 1008.0546875
- 1000.1
- 963.975

### Resistance levels
- 1055.0375
- 1090.85
- 1125

### Return and range metrics

| Metric | Value |
| --- | --- |
| return_1 | +7.02% |
| return_10 | +2.23% |
| return_1m | +12.97% |
| return_1y | +11.69% |
| return_20 | +10.52% |
| return_3m | +49.82% |
| return_5 | +4.56% |
| return_6m | +37.38% |
| return_since_start | -21.42% |
| return_ytd | +5.72% |

### Risk and volatility metrics

| Metric | Value |
| --- | --- |
| state | elevated_risk |
| label | Price risk requires attention |
| summary | Recent drawdown or price variability is high enough to warrant closer monitoring. |
| maximum_drawdown | -57.62% |
| annualized_volatility | +47.55% |

## Quarterly financials

- Latest complete quarter: fy27_q1

# Revenue Rises Year-on-Year, but Higher Costs Squeeze Profit Margins

Jyoti CNC Automation Limited reported revenue of ₹508.47 crore for the first quarter of FY2026‑27, a 23.97% increase from the same quarter last year but a 15.14% decline from the preceding quarter’s peak. While the year-on-year expansion was notable, a sharp rise in other expenses and finance costs pushed profitability lower in both comparisons, compressing margins across the board.

## Revenue

Revenue from operations reached ₹508.47 crore. That was 23.97% above the ₹410.17 crore recorded in Q1 FY2025‑26. However, it represented a 15.14% drop from ₹599.16 crore in Q4 FY2025‑26, which had been the highest quarterly revenue among the preceding four quarters.

## Cost Pressures

Two expense lines grew at a faster pace than revenue, squeezing margins.

- **Other expenses**: ₹93.73 crore, up 64.99% year‑on‑year and 15.47% sequentially.
- **Finance costs**: ₹24.34 crore, up 99.84% year‑on‑year and 22.74% sequentially.

In both the sequential and year-on-year comparisons, these costs increased at a substantially higher rate than revenue, driving margin compression.

## Profitability

Profit before tax fell to ₹73.41 crore. That is a decline of 46.85% from ₹138.11 crore in Q4 FY2025‑26 and a decline of 23.75% from ₹96.28 crore in Q1 FY2025‑26.

The drop in the profit‑before‑tax margin was widespread:
- 14.4% in Q1 FY2026‑27, compared with
- 23.0% in Q4 FY2025‑26, and
- 23.5% in Q1 FY2025‑26.

The sequential decline reflected lower revenue from the Q4 peak alongside higher operating costs. Year‑on‑year, profit before tax fell despite higher revenue because the surge in other expenses and finance costs outpaced the revenue gain.

## Tax and Net Profit

Tax expense decreased to ₹16.27 crore, down 65.78% from ₹47.54 crore in Q4 and down 34.55% from ₹24.86 crore a year earlier. The effective tax rate (tax expense divided by profit before tax) moved from 34.4% in Q4 and 25.8% in Q1 FY2025‑26 to 22.2% in the current quarter. The lower tax charge partially cushioned the pre‑tax profit decline.

Net profit was ₹57.14 crore, a sequential drop of 36.91% (from ₹90.57 crore) and a year‑on‑year drop of 19.99% (from ₹71.42 crore). The net profit margin fell to 11.2%, compared with 15.1% in Q4 and 17.4% in the same quarter last year.

## Earnings Per Share

Basic and diluted earnings per share were ₹2.51, down from ₹3.98 in Q4 FY2025‑26 and ₹3.14 in Q1 FY2025‑26. Equity share capital remained unchanged at ₹45.48 crore (face value ₹2 per share), so the entire decline in EPS stemmed from lower net profit.

## Key Takeaway

Jyoti CNC Automation’s first quarter of FY2026‑27 delivered meaningful year‑on‑year revenue growth, but rising costs—especially other expenses and finance costs—outstripped that growth and compressed profitability. The sequential picture was even sharper: revenue fell from the Q4 peak while costs continued to climb, producing a steep drop in pre‑tax and net profit. The quarter highlights a widening gap between revenue performance and cost escalation that eroded margins relative to both the preceding quarter and the same period a year ago.

### Ratios

## Official filings

- 2026-09-10 — Regulatory Filing: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_09102026161250.zip)
- 2026-09-09 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_09092026115327_BSEnseIntimationNEWSpaperAGMnoticeJCAL09092026.pdf)
- 2026-09-08 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_08092026185527_IntimationNoticefor35thAGM.pdf)
- 2026-09-08 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/xbrl/NOTICE_OF_SHAREHOLDERS_MEETINGS_22466_WebXMLFile_20260908_191322532.xml)
- 2026-09-07 — Annual Report: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/annual_reports/AR_31917_JYOTICNC_2025_2026_A_8532805_08092026190544.pdf)
- 2026-09-04 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/xbrl/SAIIM_22466_WebXMLFile_20260904_084029971.xml)
- 2026-09-03 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_03092026114334_IntimationGroupMeet.pdf)
- 2026-09-01 — Regulatory Filing: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC311_09012026150144.zip)
- 2026-08-20 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_20082026133412_BSEnseJCALIntimationInvestorMeet25082026.pdf)
- 2026-08-20 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/xbrl/SAIIM_22466_WebXMLFile_20260820_133537066.xml)
- 2026-08-18 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/xbrl/REG30_PARA_B_22466_WebXMLFile_20260818_111258323.xml)
- 2026-08-17 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_17082026222228_BSEnseJCALIntimationECMSApproval17082026.pdf)
- 2026-08-14 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/xbrl/SAIIM_22466_WebXMLFile_20260814_154839889.xml)
- 2026-08-14 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/xbrl/SAIIM_22466_WebXMLFile_20260814_154630872.xml)
- 2026-08-14 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_14082026154204_BSEnseJCALIntimationTranscriptQ1June2026.pdf)
- 2026-08-08 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_08082026092447_BSEnseJCALIntimationEarningCallRecording08082026.pdf)
- 2026-08-08 — Official Filing: Jyoti CNC Automation Limited announced on August 8, 2026, that its unaudited financial results for the quarter ended June 30, 2026, were advertised in Business Standard and Phulchhab on August 8, 2026, as per Regulation 47 of SEBI Listing Regulations.
- 2026-08-08 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/xbrl/SAIIM_22466_WebXMLFile_20260808_163906924.xml)
- 2026-08-07 — Generic Announcement: Jyoti CNC Automation Limited's Board of Directors met on August 07, 2026, to approve the standalone and consolidated financial results for the quarter ended June 30, 2026. The company reported standalone revenue from operations of ₹509.06 crore and a net profit after tax of ₹87.47 crore for the quarter. The auditors issued an unmodified opinion on these results, but noted an ongoing judicial investigation in France against step-down subsidiary Huron Graffenstaden SAS, involving a seizure of Euro 3.02 million and restrictions on its Director General. — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_07082026135835_IntimationoutcomeBoardMeet.pdf)
- 2026-08-07 — Earnings Presentation: Jyoti CNC Automation Limited submitted an investor presentation on August 7, 2026, for an earning call. The presentation includes financial highlights for Q1 FY27, showing consolidated revenue of INR 508 Cr and standalone revenue of INR 410 Cr. It also details the company's order book, which stood at INR 4,848 Cr as of June 30, 2026. — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_07082026152100_BSEnseJCALSubmissionInvestorPresentationQ107082026.pdf)
- 2026-08-07 — Generic Announcement: Jyoti CNC Automation Limited — [Official attachment](https://nsearchives.nseindia.com/corporate/xbrl/SAIIM_22466_WebXMLFile_20260807_160000843.xml)
- 2026-08-07 — Generic Announcement: Jyoti CNC Automation Limited officials will attend the Equirus Annual India Conference '26 on August 13th and 14th, 2026, in Mumbai. The meetings will be one-on-one and will only discuss publicly available information, with no unpublished price sensitive information intended for disclosure. — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_07082026155730_BSEnseJCALIntimationInvestorMeet07082026.pdf)
- 2026-08-04 — Official Filing: Jyoti CNC Automation Limited will hold an Earnings Conference Call on August 7, 2026, at 17:00 IST to discuss its Q1 FY27 financial results. The virtual meeting is open to general investors and will be conducted by the company's management.
- 2026-08-04 — Generic Announcement: Jyoti CNC Automation Limited will hold a conference call on August 7, 2026, at 5:00 PM IST to discuss financial results for the quarter ended June 30, 2026. The call is hosted by Anand Rathi Research and will include participation from the company's senior management team. — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_04082026153734_BSEnseJCALIntimationEarningCallQ1202627.pdf)
- 2026-07-13 — Generic Announcement: Jyoti CNC Automation Limited submitted a certificate for the quarter ended June 30, 2026, confirming no dematerialization or rematerialization requests were received. MUFG Intime India Private Limited, the company's Share Transfer Agent, also confirmed this in a letter dated July 4, 2026. The company's sole security, Equity Shares, is listed on the BSE Limited and National Stock Exchange of India Limited. — [Official attachment](https://nsearchives.nseindia.com/corporate/JYOTICNC_NSE_13072026152314_DP745stockExchangeIntimationJCALjune2026.pdf)

## News and market events

- 2026-09-09 — MONEYCONTROL: **Trade Spotlight: How should you trade Marico, Narayana Hrudayalaya, Granules, Laurus Labs, Caplin Point, Tata Technologies, and others on September 9?** — Trade Spotlight — [Source](https://www.moneycontrol.com/news/business/markets/trade-spotlight-how-should-you-trade-marico-narayana-hrudayalaya-granules-laurus-labs-caplin-point-tata-technologies-and-others-on-september-9-14025670.html)
- 2026-08-31 — BUSINESSTODAY: **Manipal, VBL, Urban Co, AEL, Lenskart among stocks with fresh brokerage interest for upto 62% rise** — Stocks to buy, Initiating coverage, IC Reports, Manipal Health Enterprises, Varun Beverages, Astra Microwave Products, Timex Group India, Jyoti CNC Automation, Urban Company, Adani Enterprises, Lenskart Solutions, Manipal Health shares, Varun Beverages shares, Astra Microwave shares, Timex Group shares, Jyoti CNC shares, Urban Company shares, Adani Enterprises shares, Lenskart shares, HSBC, Choice Institutional Equities, Antique Stock Broking, Systematix Institutional Equities, Dolat Capital, Emkay Global Financial Services, Motilal Oswal Financial Services, ICICI Securities, InCred Equities, Juniper Hotels, Juniper Hotels shares — [Source](https://www.businesstoday.in/markets/stocks/story/manipal-vbl-urban-co-ael-lenskart-among-stocks-with-fresh-brokerage-interest-for-upto-62-rise-552170-2026-08-31)
- 2026-08-23 — MONEYCONTROL: **Broader indices outperform; Smallcap index scales fresh high** — stock market, bse, nse, broader indices, smallcap index — [Source](https://www.moneycontrol.com/news/business/markets/broader-indices-outperform-smallcap-index-scales-fresh-high-14013166.html)
- 2026-08-18 — BUSINESS: **Stock Alert: Netweb Tech, DCX Systems, Manipal Health Enterprise** — One97 Communication (Paytm)s promoter entity, Resilient Asset Management B.V, proposes to sell up to 4.98% equity in fintech firm through a block deal under its existing optionally convertible debenture (OCD) agreement with Antfin (Netherlands) Holding B.V. (Antfin). The economic value to be received by Resilient will be retained by Antfin under the OCD agreement. — [Source](https://www.business-standard.com/markets/capital-market-news/stock-alert-netweb-tech-dcx-systems-manipal-health-enterprise-126081800132_1.html)
- 2026-08-18 — BUSINESSTODAY: **Top stocks in news: Paytm, Milky Mist, Netweb, Manipal Health, Indo-MIM, Jyoti CNC, Nelco, DCX Systems** — Stocks in news, Stocks in buzz, Stocks to buy, Stocks to watch, Paytm, One 97 Communications, Milky Mist, Milky Mist Dairy Foods, Netweb Technologies, Manipal Health Enterprises, Indo-MIM, Jyoti CNC Automation, Nelco, DCX Systems, Ceigall India, Highway Infra, Lloyds Engineering Works, SPR Auto Technologies. — [Source](https://www.businesstoday.in/markets/stocks/story/top-stocks-in-news-paytm-milky-mist-netweb-manipal-health-indo-mim-jyoti-cnc-nelco-dcx-systems-549676-2026-08-18)
- 2026-08-17 — CNBC-TV18: **Jyoti CNC gets approval for ₹1,020.65-crore investment proposal under MeitY scheme** — Jyoti CNC Automation approved a ₹1,020.65 crore capital investment over five years for its Rajkot facility under the ECMS scheme. — [Source](https://www.cnbctv18.com/business/companies/jyoti-cnc-gets-nod-rs-1020-crore-investment-proposal-under-meity-scheme-19971330.htm)
- 2026-08-07 — CNBC-TV18: **Earnings Central: SBI, Titan, Oil India and Hindalco lead a busy Friday** — SBI set the pace, while Titan beat estimates on profit and margins despite a revenue miss. Hindalco kept the momentum going, while Oil India, Raymond, Ola Electric and Jyoti CNC added their own twists to Friday's earnings. — [Source](https://www.cnbctv18.com/market/earnings/earnings-central-sbi-titan-oil-india-and-hindalco-q1-results-lead-a-busy-friday-19964546.htm)
- 2026-08-07 — CNBC-TV18: **Sensex Today | Stock Market Live Updates: Nifty falls 100 points; Sapphire up 10%** — Sensex Today | Stock Market Live Updates: We are halfway through the day's trade and the market is moving on a cautious note, but now has extended the cuts, while holding key levels, as the Nifty remains above 24,600 as it looks to move ahead. The Nifty Bank is down close to 300 points, falling below the 57,900 mark. Tech Mahindra, TCS and HCLTech are the top gainers. — [Source](https://www.cnbctv18.com/market/stock-market-live-updates-sensex-nifty-50-today-cas-tata-hero-pgel-lic-sci-sbi-ncc-premier-crompton-midcaps-share-price-liveblog-19963799.htm)
- 2026-08-07 — CNBC-TV18: **Jyoti CNC Q1 Results: Shares plunge 10% as profit falls, margin contracts** — Gujarat-based Jyoti CNC Automation reported a mixed June-quarter performance, with revenue rising 24% but profit falling 20% as margins contracted sharply. Shares plunged over 10% after the results, extending the focus on profitability after a weaker FY26. — [Source](https://www.cnbctv18.com/market/earnings/jyoti-cnc-automation-q1-results-shares-plunge-as-profit-falls-margin-contracts-19964209.htm)
- 2026-08-07 — CNBC-TV18: **Q1 Results LIVE Updates: SBI tops profit, NII estimates; Electronics Mart revenue up 39%** — Q1 Results LIVE Updates: Three Nifty 50 companies, SBI, Hindalco and Titan, as well as Kaynes Tech, BEML, Aarti Pharmalabs, Azad Engineering, Godrej Consumer, JK Tyre, Jubilant Pharmova, Maharashtra Seamless, Lemon Tree Hotels, Oil India, PFC, ABB India, Poly Medicure, Ramco Cements, Prism Johnson, Raymond, Raymond Realty, Ratnamani Metals & Tubes, among other companies are reporting their earnings today. Earnings reactions come from LIC, Hero MotoCorp, PG Electroplast, Britannia, Sonata Software and other companies. Watch this space for all the LIVE result updates for Q1. — [Source](https://www.cnbctv18.com/market/q1-results-live-updates-sbi-hindalco-titan-lic-pg-electroplast-hero-britannia-pfc-abb-beml-kaynes-fortis-azad-engg-share-price-liveblog-19963817.htm)
- 2026-08-04 — Mint: **Stocks to buy for short term: BPCL, MRPL, IndiGo among 6 stocks experts recommend for next 1-2 weeks** — Expert analysts recommend six stocks poised for short-term growth. With technical breakouts and positive momentum indicators, find out which companies—ranging from BPCL to IndiGo—should be on your radar for potential investment in the coming weeks. — [Source](https://www.livemint.com/market/stock-market-news/stocks-to-buy-for-short-term-bpcl-mrpl-indigo-among-6-stocks-experts-recommend-for-next-1-2-weeks-11785811195347.html)
- 2026-08-04 — Mint: **Raja Venkatraman recommends three stocks for 4 August** — Market expert Raja Venkatraman shares his top stock picks for 4 August. Here’s his technical outlook and trade strategy. — [Source](https://www.livemint.com/market/stock-market-news/raja-venkatraman-recommends-three-stocks-for-4-august-11785804004747.html)

## Business profile

**Strategic vision:** Manufactures CNC machine tools for global industries.

### Business segments
- **CNC Metal-Cutting Machines:** Manufactures a range of CNC metal-cutting machines including turning centers, machining centers, and multi-tasking machines, incorporating Industry 4.0 and AI solutions.
- **Aerospace and Defence Machining:** Focuses on advanced machining capabilities for complex components, positioning itself as a supplier for indigenous defence manufacturing.
- **5-Axis CNC Machines (via Huron):** Through its subsidiary Huron Graffenstaden SAS, specializes in high-dynamic, high-precision 5-axis CNC machines for demanding industry segments.

### Competitive strengths
- Incorporates Industry 4.0 and Artificial Intelligence (AI) Solutions into its offerings.
- Strategic focus on aerospace and defence machining.
- European operations enhance technological capabilities and presence in the premium segment.

## Related stocks

- [AIAENG (Engineering & Capital Goods)](https://faxioms.com/stocks/aiaeng) — -0.37%
- [AMBER (Engineering & Capital Goods)](https://faxioms.com/stocks/amber) — +1.38%
- [ASTRAL (Engineering & Capital Goods)](https://faxioms.com/stocks/astral) — +0.59%
- [CEMPRO (Engineering & Capital Goods)](https://faxioms.com/stocks/cempro) — +0.23%
- [CIEINDIA (Engineering & Capital Goods)](https://faxioms.com/stocks/cieindia) — +0.32%

## Freshness and sources

- Data as of: 2026-09-18
- Source: Faxioms public stock analysis API

Canonical: https://faxioms.com/stocks/jyoticnc
Markdown representation: https://faxioms.com/stocks/jyoticnc?render=md